#MikrotikTips Menggunakan Mikrotik Bandwitdh Test

0
2733
Jangan lupa sertakan sumber dengan jelas jika ingin mencopy

Menggunakan Mikrotik Bandwitdh Test. The Bandwidth Tester can be used to measure the throughput to another MikroTik router (either wired or wireless) and thereby help to discover network "bottlenecks".

The TCP test uses the standard TCP protocol with acknowledgments and follows the TCP algorithm on how many packets to send according to latency, dropped packets, and other features in the TCP algorithm. Please review the TCP protocol for details on its internal speed settings and how to analyze its behavior. Statistics for throughput are calculated using the entire size of the TCP data stream. As acknowledgments are an internal working of TCP, their size and usage of the link are not included in the throughput statistics. Therefore this statistic is not as reliable as the UDP statistic when estimating throughput.

Test Speed Bandwidth??? Penting kah???

Bagi saya ini penting,,, maklum tiap hari ngubek-ngubek jaringan. Penting karena mas Bos ingin tau, bahwa dia tidak dicurangi oleh pihak ISP.

Artikel Terkait   Dasar Jaringan. Cara mudah memahami NAT-Network Address Translation)

BTest adalah versi GUI untuk test bandwidth. Aplikasi ini hanya bisa dipakai untuk Router OS Mikrotik. No Cisco, no Vyatta dll.



Seberapa akurat hasilnya ??? tingkat kesalahan tidak dijelaskan dari pihak mikrotik.

Piye ki??? Menggunakan Mikrotik Bandwitdh Test

Ora pati penting janne,,, tapi yo ra po2 neh,,, gae catetan...

Langsung wae,,,, iki perintahe

1. Ngatur Bandwidth Server

    /tool/bandwidth-server

[[email protected]] /tool bandwidth-server> print                                  
                  enabled: yes                                                  
             authenticate: yes                                                  
  allocate-udp-ports-from: 2000                                                 
             max-sessions: 100                                                  
[[email protected]] /tool bandwidth-server>

2. Active Session
Iki yen pengen weruh sing test sopo wae

[[email protected]] /tool bandwidth-server session> print
  # CLIENT          PROTOCOL DIRECTION USER
  0 35.35.35.1      udp      send      admin
  1 25.25.25.1      udp      send      admin
  2 36.36.36.1      udp      send      admin
[[email protected]] /tool bandwidth-server session>

3. Bandwitdh Test Client

[[email protected]] > tool bandwidth-test 202.129.188.222 duration=60s random-data=yes direction=receive user=xxx password=xxx protocol=udp
                status: done testing
              duration: 15s
            rx-current: 169.6Mbps
  rx-10-second-average: 164.8Mbps
      rx-total-average: 117.0Mbps
          lost-packets: 373
           random-data: no
             direction: receive
               tx-size: 1000
               rx-size: 1000

4. Uwis jelas durung???

Artikel Terkait   #MikrotikTips - Dynamic DNS Update Script for dynDNS on Mikrotik

The UDP tester sends 110% or more packets than currently reported as received on the other side of the link. To see the maximum throughput of a link, the packet size should be set for the maximum MTU allowed by the links which is usually 1500 bytes. There is no acknowledgment required by UDP; this implementation means that the closest approximation of the throughput can be seen.

Bandwidth Test uses all available bandwidth (by default) and may impact network usability.

Bandwidth Test Server

/tool/bandwidth-server
[[email protected]] /tool bandwidth-server> print                                  
                  enabled: yes                                                  
             authenticate: yes                                                  
  allocate-udp-ports-from: 2000                                                 
             max-sessions: 100                                                  
[[email protected]] /tool bandwidth-server>

Active Session

[[email protected]] /tool bandwidth-server session> print
  # CLIENT          PROTOCOL DIRECTION USER
  0 35.35.35.1      udp      send      admin
  1 25.25.25.1      udp      send      admin
  2 36.36.36.1      udp      send      admin
[[email protected]] /tool bandwidth-server session>

Bandwitdh Test Client

[[email protected]] > tool bandwidth-test 202.129.188.222 duration=60s random-data=yes direction=receive user=xxx password=xxx protocol=udp
                status: done testing
              duration: 15s
            rx-current: 169.6Mbps
  rx-10-second-average: 164.8Mbps
      rx-total-average: 117.0Mbps
          lost-packets: 373
           random-data: no
             direction: receive
               tx-size: 1000
               rx-size: 1000

Any Question???

Artikel Terkait   #MikrotikTips ~ SSH (Secure Shell) Server and Client

Bandwidth Test akan menyedot semua bandwidth yang ada.

Diperlukan 3 perangkat router, Server bandwidth, Router yang diuji dan Router Klien

Namun saya biasanya hanya menggunakan 2 perangkat, dan bukan menggunakan GUI

Ok, mulai,

1. Bandwidth test server
Jika anda mempunyai akses ke router utama set router sebagai berikut

/tool/bandwidth-server
[[email protected]] /tool bandwidth-server> print                                  
                  enabled: yes                                                  
             authenticate: yes                                                  
  allocate-udp-ports-from: 2000                                                 
             max-sessions: 100                                                  
[[email protected]ikroTik] /tool bandwidth-server>

2. Active Session
Mengetahui sesi yang sedang menjalankan Btest

[[email protected]] /tool bandwidth-server session> print
  # CLIENT          PROTOCOL DIRECTION USER
  0 35.35.35.1      udp      send      admin
  1 25.25.25.1      udp      send      admin
  2 36.36.36.1      udp      send      admin
[[email protected]] /tool bandwidth-server session>

3. Bandwitdh Test Client

[[email protected]] > tool bandwidth-test 202.129.188.222 duration=60s random-data=yes direction=receive user=xxx password=xxx protocol=udp
                status: done testing
              duration: 15s
            rx-current: 169.6Mbps
  rx-10-second-average: 164.8Mbps
      rx-total-average: 117.0Mbps
          lost-packets: 373
           random-data: no
             direction: receive
               tx-size: 1000
               rx-size: 1000

 4. Ada Pertanyaan??? Menggunakan Mikrotik Bandwitdh Test



Jangan lupa tinggalkan komentar ya gais

This site uses Akismet to reduce spam. Learn how your comment data is processed.